Deleting The Usb Audio Device Driver - Edirol AUDIO Capture UA-1D Manual Del Usuario

Troubleshooting

Deleting the USB Audio Device driver

If re-installing the USB Audio Device driver
If installation of the USB Audio Device driver was
terminated before completion
Use the following procedure to delete the driver that is already installed.
* The explanation provided here is for an average Windows system.
1.
Use a USB cable to connect the UA-1D to your computer.
* To prevent damage to your speakers, turn down the volume on any
2.
Click the Windows [Start] button, and select [Settings] - [Control Panel].
3.
In [Control Panel], double-click [System] to open the System Properties
dialog.
4.
Click the [Device Manager] tab.
5.
Double-click [Sound, video and game controllers] to see a list of the
devices.
6.
From the list, select USB Audio Device, and click [Remove]. In the
Confirm Device Removal dialog box, click [OK]. If USB Audio Device is
not displayed, proceed to step 8.
7.
Make sure that USB Audio Device is not in the Sound, video and game
controllers list, and click [Close] to close the System Properties dialog.
* If a dialog box suggesting that you restart Windows appears at this
8.
Follow the steps 1. – 4. again, and double-click [Universal Serial Bus
controllers] to display the list of devices.
If
If there is no USB-compatible device icon, or if
If you are using Windows Me and
9.
Disconnect the USB cable from your computer, and restart Windows.
36
Depending on your computer, some of the folder names may be different.
audio devices you may have connected.
point, follow the suggestion and restart your computer.
is displayed for the USB-compatible device icon:
Select the [USB Composite Device] icon, and click [Remove]. In the
Confirm Device Removal dialog box, click [OK]. As in the step 7.,
close System Properties.
Simply close System Properties.
Simply close System Properties.
is not displayed:
is displayed: