Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CONNECT DECORATIVE FLUE
1. Secure the upper flue to the upper support
frame
with
(3.9x9.5mm).
2. Insert the lower flue moving it completely
towards the top and fix it temporarily with
retaining screws (3.9x9.5mm).
MOUNT HOOD TO SUPPORT
FRAME
1. Remove the tape located on the damper.
2. Before mount hood to support frame remove
the wiring box.
3. Use four (4) nuts and four (4) washers
(D.6.4mm) to secure hood to support frame
as shown.
4. Replace wiring box.
the
mounting
INSERT THE LOWER FLUE
RETAINING
SCREWS
(3.9x9.5mm)
screws
REMOVE THE
TAPE
- 6 -
MOUNTING SCREWS
(3.9x9.5mm)
UPPER FLUE
LOWER
FLUE
WIRING BOX
NUT
WASHER
(Ø6.4mm)
Publicidad
Tabla de contenido
