Setting Method - Kenwood KCA-S220A Manual De Instrucciones

Setting Method

Setting the AUX Switch
Set the AUX switch.
7 Setting the AUX switch of the switching unit belonging to Group A
¶ To listen to the sound of the unit connected
to the TO CHANGER 1 and TO CHANGER 2
terminals
Set the switching unit AUX switch to "OFF".
7 Setting the AUX switch of the switching unit belonging to Group B
Set the switching unit AUX switch to "ON".
• Before setting the AUX switch, be sure to turn off the control unit.
Switching Sources
Each time the SRC button on the control unit is pressed, the source changes. For details on how to change
sources, refer to the instruction manual that comes with the control unit.
7 If the unit you are connecting belongs to Group A
Source to Change
Unit connected to TO CHANGER 1 terminal
Unit connected to TO CHANGER 2 or AUX terminal
7 If the unit you are connecting belongs to Group B
Source to Change
Unit connected to TO CHANGER 1 terminal
Unit connected to TO CHANGER 2 terminal
Unit connected to AUX terminal
¶ To listen to the sound of the unit connected
to the TO CHANGER 1 and AUX terminals
Set the switching unit AUX switch to "ON".
Source Selected by Control Unit
Disc Changer 1
Disc Changer 2
Source Selected by Control Unit
Disc Changer 1
Disc Changer 2
AUX / AUX EXT
5
English