To Clean The Product, The Battery And The Battery Charger; Troubleshooting; User Interface; Transportation, Storage And Disposal - Husqvarna 550iBTX Manual Del Usuario

Maintenance
Make sure that all couplings, connections and cables are not damaged. Remove
dirt.
Make sure that the battery connectors are not damaged.
To do a check of the air intake
1. Make sure that the air intake is not blocked.
2. Stop the product and remove unwanted material if it
is necessary.
CAUTION:
air intake decreases the performance of

User interface

User interface
Green LED Flashes
Red error LED flashes
The product does not start
Red error LED flashes
Transportation and storage
• The supplied Li-ion batteries obey the Dangerous
Goods Legislation requirements.
790 - 006 - 13.03.2020
A blocked

Troubleshooting

Possible faults
Low battery voltage.
Temperature deviation.
Dirt in battery connectors.
The battery is off.
The product needs servicing.

Transportation, storage and disposal

the product and can cause the motor to
become too hot.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that these parts are clean before the
battery is connected to the battery charger or the
product:
a) The terminals on the backpack battery cable.
b) The terminals on the backpack battery adapter.
c) The terminals on the battery charger.
d) The terminals on the backpack blower.
Possible action
Charge the battery.
Let the product cool down.
Clean with compressed air or a soft
brush.
Start the battery.
Contact your servicing agent.
• Obey the special requirement on package and labels
for commercial transportation, including by third
parties and forwarding agents.
• Speak to a person with special training in dangerous
material before you send the product. Obey all
applicable national regulations.
Daily Weekly Monthly
X
X
13