To Assemble The Tube And Handle On The Product :580Bts Mark; To Assemble The Tube And Handle On The Product :580Bfs Mark - Husqvarna 580BTS Mark II Manual Del Usuario

To assemble the tube and handle on
the product :580BTS Mark II
1. Attach the flexible hose (A) to the pipe angle and the
control pipe (B) with the clamps (C), (D).
C
Note: Lubricate the control pipe and the flexible hose
to make them more easy to assemble.
2. Attach the handle (E) to the control pipe and put the
knob through the handle.
E
3. Tighten the knob.
4. Attach the cable to the flexible hose with the cable
clamp.
936 - 004 -
A D
B
5. Attach the intermediate pipe to the control pipe.
6. Attach the blower nozzle to the intermediate pipe.
To assemble the tube and handle on
the product :580BFS Mark II
1. Attach the flexible tube (A) to the pipe angle with the
clamp (C).
E
B
2. Push the handle (E) onto the control pipe (B)
.
C
A
D
F
G
9