Rear Panel - Sony VSP-NS7 Manual De Instrucciones

Rear Panel

1
8
a
(PS/2 mouse) connector /
keyboard) connector (6-pin mini-DIN)
Used for maintenance.
Note
Do not connect for a purpose other than maintenance.
b
(serial) (general purpose interface)
connectors (D-sub 9-pin, male)
Connect this to the D-sub 9-pin connector of an LCD or
video monitor to allow you to control those devices.
Note
You can control only an LCD or video monitor that
supports the VSP-NS7.
(PS/2 mouse) connector /
(serial) connectors
2
(analog RGB output) connector
3
4
7 USB connectors
(audio line input) connector
(audio line output) connector
9
0 System indicator
(PS/2
(PS/2 keyboard) connector
(network) connector
(microphone input) connector
5
6 PCI Express ×16 slot
qa Access indicator
qs Power indicator
qd Power switch
c
(analog RGB output) (general purpose
interface) connector (HD D-sub 15-pin,
female)
Connect this to the VGA connector of an LCD or video
monitor.
d
(network) connector (RJ-45 modular
jack)
This is a 10BASE-T/100BASE-TX/1000BASE-T
connector for network (Ethernet) connection.
CAUTION
• For safety, do not connect the connector for
peripheral device wiring that might have excessive
voltage to this port.
Follow the instructions for this port.
• When you connect the LAN cable of the unit to
peripheral device, use a shielded-type cable to prevent
malfunction due to radiation noise.
Names and Functions of Parts 21