Serial Connection - Edirol Canvas SD-20 Manual Del Usuario

Serial connection

The following items are required for connections and installation. Please
have the following items ready.
• SD-20
• AC adaptor
• Computer cable
• CD-ROM
The installation procedure will differ depending on your system.
Please proceed to one of the following sections, depending on the system you
use.
• Windows XP users ..................................................... (p. 29)
• Windows 2000 users................................................... (p. 33)
• Windows Me/98 users .............................................. (p. 37)
Windows XP users
1
Make sure that the power is turned off for the SD-20, your computer, and all
peripheral devices.
2
Set the computer switch of the SD-20 to PC.
3
Use the computer cable to connect the serial connector of your computer to
the SD-20.
4
With the SD-20's power switch turned off, connect it to the AC adaptor.
5
Plug the AC adaptor into an AC power outlet.
6
Turn on the power of the SD-20 and your computer, and start up Windows.
7
Open the System Properties dialog box.
1. Click the Windows start menu, and from the menu, select Control
Panel.
2. In "Pick a category," click "Performance and Maintenance."
3. In "or pick a Control Panel icon," click the System icon.
Getting connected and installing drivers (Windows)
If you are using Windows
XP Professional, you must
log on using a user name
with an administrative
account type (e.g.,
Administrator). For details
on user accounts, please
consult the system
administrator of your
computer.
For details on connections,
refer to Basic
connections (p. 13)
Depending on how your
system is set up, the
System icon may be
displayed directly in the
Control Panel (the Classic
display). In this case,
double-click the System
icon.
29