Leveling Instructions - Danby DDW1804EW Manual Del Propietário

INSTALLATION INSTRUCTIONS

LEVELING INSTRUCTIONS

Ensure that the appliance is level before placing it
into the enclosure. The rear foot can be adjusted
from the front of the dishwasher by turning. Use
a fl at screwdriver to adjust the front feet until the
appliance is level.
INSTALLATION BRACES
The appliance must be secured in place with the
installation braces. There are two different ways to
use the braces.
A. Normal work surface
Put the installation hook into the slot of the side
plane and secure it to the work surface with the
wood screws.
B. Marble or granite counter top
Fix the side with the screw. Place the screw covers
over the internal screws to protect them from water.
CONDENSATION STRIP
Attach the condensation strip under the work
surface of the cabinet. Ensure that the strip is fl ush
with the edge of the work surface.
TOE KICK INSTALLATION
Install the toe kick on the bottom of the appliance.
A
1
2
1
2
6
B 1
2
3