Maintenance; Safety Recommendations - Dolmar TM-98.14 H2D Manual De Instrucciones

EN 32
6.

MAINTENANCE

6.1 SAFETY RECOMMENDATIONS

WARNING!
!
the ignition key and read the relevant instructions. Wear suitable clothing
and strong gloves when dismantling and refitting the blades and in all
other hazardous situations for hands.
WARNING!
!
Faulty or worn-out parts must always be replaced and not repaired. Only
use genuine spare parts: those that are not of an equivalent quality may
damage the machine or endanger the safety of yourself and others.
IMPORTANT
rised places!
6.1.1 L
IFTING THE FRONT
If you need to have easy access to the lower part of the machine, it is possible to
lift the front part of the machine.
WARNING!
!
competent people should be involved in this operation to assure neces-
sary safety.
Position a support block (1) in wood (other other material) that can bear the
weight of the machine; it should be 30-35 cm high with a base of at least 100 x
25 cm.
To stop the machine from accidentally
moving backwards:
– engage the parking brake;
– shift the gear lever to 1st gear (
in the mechanical transmission
➤
models) or (
models) check that the transmis-
sion release lever ( ☛ 4.33) is in
position «A» (engaged).
Before cleaning, maintenance or repair work, take out
Never use the machine with worn or damaged parts.
Never get rid of used oil, fuel or other pollutants in unautho-
Place the machine on firm and flat ground. At least two
➤
in the hydrostatic
2
MAINTENANCE
30-35
1
cm