SKYLOTEC DEUS 3300 Instrucciones De Uso página 17

When using a DEUS 3000 Series controlled
descent device for travel restraint in "rescue"
mode, use this procedure:
a) Rig for "rescue" by connecting your anchorage
connector to a suitable anchorage.
b) Secure one end of the rope to your harness
with a suitable connector.
c) With the control dial in the "go" position, have
your partner manually pull rope through the
device to establish a "safe working perimeter,"
and then have your partner turn the control dial
to the "stop" position.
d) Readjust as necessary to maintain a "safe
working perimeter."
Because DEUS 3000 Series controlled descent
devices operate reversibly, both ends of the rope
can be anchored when the device is used with
"escape" rigging for travel restraint. Anchoring
both rope ends provides an additional degree of
versatility and provides additional refinement to
how travel is restrained. The following drawing
shows a DEUS 3000 Series controlled descent
device used for travel restraint using "escape"
rigging.
17