Basic Operation; General Functions; Tuner Functions - Kenwood KDC-X792 Manual De Instrucciones

Basic Operation

Release
AUX
Auxiliary input
(Rear side)

General functions

Power/Source Select button
Turns on the power.
When the power is ON, select a source.
SRC Select mode 1: Press the [SRC] button and then
turn the Control knob or push it toward left or right.
To determine the selected source, press the Control
knob.
SRC Select mode 2: Pressing this button each time
switches between sources.
Tuner ("TUNER") , USB or iPod ("USB" or "iPod"), CD
("Compact Disc") , Auxiliary input ("AUX"), and Standby
("STANDBY")
Press at least 1 second to turn off the power.
⁄
• The SRC Select mode can be set in "MENU" > "SRC
Select" of <Function Control> (page 6).
• When an optional accessory is connected, the
source name for each device appears.
• When connection of the iPod is recognized, the
source display changes from "USB" to "iPod".
• USB (iPod) source is recognized as CD source on the
connected unit.
Volume control [AUD]
Turn the knob to adjust the volume.
Attenuator [ATT]
Turning the volume down quickly.
When the volume is reduced, the "ATT" indicator
flashes.
Muting volume upon reception of phone call
When there is a call, "CALL" is displayed and the
audio system is paused. When the call ends, "CALL"
disappears and the audio system comes back on.
The audio system comes back on when [SRC] is
pressed during a call.
4
|
KDC-X792/KDC-X692/KDC-MP738U/KDC-MP638U
[AUD]
[1]
[ATT] [SRC]
[SRC]
[2] [3] [4] [5] [6]
⁄
• To use the TEL Mute feature, you need to hook
up the MUTE wire to your telephone using
a commercial telephone accessory. Refer to
<Connecting Wires to Terminals> (page 34).
Auxiliary input
Connect a portable audio device with mini-plug
cable (3.5 ø).
⁄
• Use the mini-plug cable which is stereo type and
does not have any resistance.
• The auxiliary input requires the setting made in
"MENU" > "Built in AUX" of <Function Control> (page
6).
Subwoofer output
Switches between ON ("SUB WOOFER ON") and OFF
("SUB WOOFER OFF") each time pushing toward down
for at least 2 seconds.
Function Control
Pressing this button allows you to set various
functions using the Control knob. Refer to <Function
Control> (Page 6).
Category Function of setup item
MENU Allows you to set up the environment.
DISP Allows you to set up the display.
Text/Title scroll
Scrolls the CD, audio file, and Radio text display when
pushing toward up for at least 2 seconds.

Tuner functions

Band select Control knob
Switches between FM1, FM2, and FM3 each time
pushing toward up.
Switches to AM when pushing toward down.
Control knob
[FNC] [AUTO]
USB Terminal
Auxiliary input
Control knob
[FNC]
Control knob