En Original Instructions; Conformity Declaration; Installation Of Sanding Disc; Dust Extraction - Metabo FSX 200 Intec Manual Original

en ENGLISH
Original instructions

1. Conformity Declaration

We, being solely responsible, hereby declare that
these disc sanders conform to the standards and
directives specified on page 3.
2. Specified Use
The machine is suitable for dry sanding of flat and
elliptical surfaces, wood, plastics, non-ferrous
metals, sheet metal and similar filled and painted
surfaces.
The user bears sole responsibility for damage
caused by improper use.
Generally accepted accident prevention
regulations and the enclosed safety information
must be observed.
3. General Safety Instructions
For your own protection and for the
protection of your electrical tool, pay
attention to all parts of the text that are
marked with this symbol!
WARNING – Reading the operating instruc-
tions will reduce the risk of injury.
WARNING Read all safety warnings and
instructions. Failure to follow all safety warn-
ings and instructions may result in electric shock,
fire and/or serious injury.
Keep all safety instructions and information for
future reference.
Pass on your electrical tool only together with these
documents.
4. Special Safety Instructions
Dust from material such as paint containing lead,
some wood species, minerals and metal may be
harmful. Contact with or inhalation of the dust may
cause allergic reactions and/or respiratory diseases
to the operator or bystanders.
Certain kinds of dust are classified as carcinogenic
such as oak and beech dust especially in
conjunction with additives for wood conditioning
(chromate, wood preservative). Material containing
asbestos must only be treated by specialists.
- Use a dust extractor or the dust collection box
where possible.
- To achieve a high level of dust collection, use a
suitable Metabo vacuum cleaner together with this
tool.
- The work place must be well ventilated.
- The use of a dust mask of filter class P2 is
recommended.
Follow national requirements for the materials you
want to work with.
Pull the plug out of the plug socket before any
adjustments or servicing are performed.
8
Wear ear protectors when working for long
periods of time. High noise levels over a
prolonged period of time may affect your hearing.
Materials that generate dusts or vapours that may
be harmful to health (e.g. asbestos) must not be
processed.
Secure the workpiece against slipping, e.g. with the
help of clamping devices.
5. Overview
See page 2.
1 Sanding disc
2 Support plate
3 On/off switch
4 Dust collection box
5 Cleaning flap
6 Fluted filter
6. Commissioning
Before plugging in, check to see that the rated
mains voltage and mains frequency,
as stated on the rating label, match your power
supply.
6.1

Installation of sanding disc

Simple attachment and removal thanks to the
velcro-type fastening.
Simply press on the sanding disc such that the
holes in the sanding disc (1) are aligned with the
support plate (2).
7. Use
7.1 Switching On and Off
Switching on:
Move switch (3) to "I" position.
Switching off:
Move switch (3) to "O" position.
7.2

Dust Extraction

To optimise the dust extraction performance, fit the
sanding disc such that the holes on the sanding disc
(1) are aligned to the support plate (2).
Integrated extraction system:
Install the dust collection box (4) (see illustration,
page 2). To optimise the extraction performance,
empty the dust collection box (4) in good time and
clean the filter (6).
External extraction system:
Fit dust extraction nozzle (see chapter on
Accessories). Connect a suitable extraction device.
Use a suction hose with a 35 mm connector
diameter. See Accessories section.