Personal safety
•
Never leave the machine unsupervised with the motor
running.
•
Always unplug the power supply to the power pack for
longer work breaks.
•
Never work alone, always ensure there is another
person close at hand. Apart from being able to receive
help to assemble the machine, you can also get help
if an accident should occur.
•
People and animals can distract you causing you to
lose control of the machine. For this reason, always
remain concentrated and focused on the task.
•
People that need to be in close proximity of the
machine must wear hearing protection as the sound
level when cutting exceeds 85 dB(A).
•
Always work in a manner that permits easy access to
the emergency stop. If an emergency situation should
arise anyway, push the red emergency stop button on
the power pack or the stop button on the remote
control.
Use and care
This machine is only intended for use together with the
intended Husqvarna products. All other use is forbidden.
•
The machine is intended for use in industrial
applications by experienced operators.
•
Inspection and/or maintenance should be carried out
with the motor switched off and the plug disconnected.
•
Place the power unit on the workplace, making sure
that it is standing on a stable surface and that it is
protected from water spray. Always disconnect the
plug for the power unit before moving it.
•
Observe care when lifting. You are handling heavy
parts, which imply the risk of pinch injuries or other
injuries.
•
Never pull out the power cable without first switching
off the power pack and waiting for the engine to come
to a complete halt.
•
Check that all couplings, connections and cables are
intact and free from dirt.
•
Read through the manual supplied with the tool being
connected before starting to use the machine.
12 – English
OPERATING
Transport and storage
•
Always switch of the power pack and pull out the
electric cable before moving the equipment.
•
Secure the equipment during transportation in order
to avoid transport damage and accidents. If the power
unit was purchased together with wall saw equipment
WS220, it can easily be stored in the designated place
in the accompanying transport trolley.
•
Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
•
Store the machine and its equipment in a dry and frost
proof place.
•
Do not expose the unit to temperatures below -30 °C
or over 50 °C or to direct sunlight.