Before starting
WARNING! Please read the operator's
!
manual carefully and make sure you
understand the instructions before using
the machine.
Wear personal protective equipment. See
instructions under the "Personal
protective equipment" heading.
Make sure no unauthorised persons are
in the working area, otherwise there is a
risk of serious personal injury.
Check that the machine is assembled
correctly and do not show any signs of
damage. See instructions in the section
"Assembling and adjustments".
•
Perform daily maintenance. See instructions in the
section "Maintenance".
•
Connect a power source
•
Connect the cooling water
See instructions in the section "Assembling and
adjustments".
A petrol or diesel driven generator can be used as a
power source if sufficiently powerful. See typical
generator operation cases in Technical Data.
NOTICE! The generator must be earthed or grounded
to safeguard the function of the power unit.
NOTICE! A generator which on some occasion
generates an input voltage outside the voltage range
specified in the technical data can damage the power
unit.
20 – English
STARTING AND STOPPING
Starting
•
Start the water supply to the power unit
•
Check that the emergency stop button on the power
unit and the stop button on the remote control are not
pushed in by turning them clockwise.
•
The connected tool is activated and this is shown by
the information shown in the display.
Follow the instructions in the manual supplied with the
connected tool.
Stopping
Follow the instructions in the manual supplied with the
connected tool.
•
Press down the power unit emergency stop.
•
Shut off the water supply to the power unit.