Cleaning and
Maintenance
iMPoRtant: your glass blending Jar, shaving and blending blades are subject
to wear during normal use. always inspect for nicks, chips, or cracks. always
inspect for broken, cracked, or loose blades. if the jar or shaving and blending
blades are damaged, do not use. call our toll-free customer service number,
1-877-689-2737, to obtain replacement parts.
1.
Make sure unit is unplugged. Place on a clean dry surface.
Turn the unit so the back is facing you. Push down on
the Ice Reservoir Release Button. Lift the back of the Ice
Reservoir and remove. This will expose the Shaving Paddle
and Ice Hopper.
Note the location of the Shaving Blade
inside the Ice Hopper.
WaRning: do not Place fingeRs inside tHe
ice HoPPeR neaR tHe sHaVing blade.
blade is sHaRP Handle caRefully.
2.
To Remove the Shaving Paddle: Press the button located
behind the Ice Chute. If the button cannot be pressed, rotate
the Shaving Paddle for a half turn and retry.
While pressing the button, rotate the shaving Paddle
counter-clockwise (to the left) by placing fingers in the
ridges of the Shaving Paddle and unscrew. This will expose
the Ice Hopper and Shaving Blade.
To re-assemble the Shaving Paddle, simply replace it into
the threaded insert and rotate clockwise. Hand tighten only.
-8-
sHaVing
blade