NSK Ti-Max X X450L Manual Del Usuario página 12

7-3 Cleaning (Optic)
Wipe clean the Glass Rod tip with an alcohol-immersed cotton swab. Remove all debris and oil. (Fig. 7)
CAUTION
Do not use a sharp tool to clean the Glass Rod. It could damage the glass and reduce the light
transmission.
7-4 Cleaning (Spray Port)
When spray ports are clogged, or spray does not exit evenly from the ports, clean the ports as follows.
(Fig. 8)
CAUTION
· Do not forcibly insert the wire into the port. Resultant port damage could cause the spray to be
directed away from the bur, and the cooling efficiency reduces.
· Do not blow the air into the Clean Head Hole.
10
Cotton Swab
Glass Rod
Fig. 7
Spray Port
Cleaning Wire
Fig. 8