NSK Ti-Max X X450L Manual Del Usuario página 6

3. Setting of Air & Water Supply Pressure
Measure the supply pressure at the handpiece / hose connection point and set the pressure to the value
specified on the specification table. (Fig. 1)
For Multi Gauge information refer to Option Parts List.
WARNING
Do not exceed the optimum pressure specified on the specification table.
CAUTION
Do not use air contaminated by dust, moisture and oil.
4. Connection & Disconnection of the Handpiece
Refer to Operation Manuals of coupling and hose before connecting the handpiece.
4
Exhaust Chip Air Pressure
Air Pressure Water Pressure
Drive Air
Pressure
Handpiece
Fig. 1