Programming The Timer: Minute Counter; Programming The Timer: Cancelling The Programme; Safety; Over Lock Function - Klugmann KO913TCX Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69
Now set the cooking end time: the control usually
adds the cooking time to the current time and
proposes the result as the cooking end time. In our
case it will propose 10:30 (8:30+2 hours).
Change the cooking end time to make it coincide with the time
you require. In our example this is 1.00 p.m.
The oven now enters into stand-by and the oven light switches
off. When it is time to start cooking, the light will not be
automatically switched on because it is logical to assume that
the delayed start coincides with your absence, so it is pointless
to leave the light on for no reason.
The control will automatically
activate the oven at 11:00 (1:00
p.m. –2 hours) and will switch it
off at 1.00 p.m., meaning that the
roast will be ready when you arrive
home!

Programming the timer: minute counter

The minute counter is a function of the timer which is
independent of the operation of the oven, meaning that it does
not block the cooking and does not switch off the oven, but
acts as a beeper. You can set it at any time, as a reminder
to check cooking on the hob, as well as the oven, or for other
cooking activities.
This can also be used with the oven switched off. In this case
all you have to do is touch the timer function symbol.
If you use it with the oven switched on, you must touch the time
function symbol three times in a row.
The dividing dots flash to indicate that it is possible to set the
value.
Set the minutes using the + and - symbols.
The count begins now. When the time indicated is up, the oven
will make a beeping sound and the special symbol will flash.
Press any button to interrupt the beeping sound.

Programming the timer: cancelling the programme

To cancel a programme, it is necessary to take the value
assigned previously to zero or switch off the oven.
Safety: oven switch-on lock
The control males a lock available on the console to prevent
the oven from being switched on or the cooking settings from
being interfered with.
It can be activated and deactivated at any time using the on/
off button.
Touch the on/off symbol for at least three seconds to activate
or deactivate, alternately, the oven lock.
31
5 sec.!!
Lock activated:
red padlock closed symbol on
the display Every action linked
to cooking is disabled.
GB

Publicidad

Tabla de contenido
loading

Tabla de contenido