Brandt BFU662LNW Guia De Instalacion página 44

3. Remove the bottom cover 1.
4. Remove the bottom bracket 2 together with washers on the axle and the plastic spacer.
Unscrew the axle together with washers from the bracket and screw them into the aperture on
the opposite side of the bracket symmetrically to former position.
5. Remove the bottom bracket 7 and fix the bottom bracket 2 together with washers on the axle
and the plastic spacer instead of it. Screw the bracket 7 in place of the bracket 2.
6. Hang the freezer compartment door on the axle of bracket 7.
7. Turn the bracket 6 around by 180° together with the washers on the axle and the plastic
spacer. Unscrew the axle and the washers and screw them on the other side of the bracket.
Once the bracket 6 is attached to the freezer compartment door, fix it in place on the other
side of the freezer in the uppermost apertures.
8. Use the covers c to cover the bracket and the remaining space.
9. Remove the bolt covers a and the stoppers b. Remove the screws that hold the handles in
place. Move the handles to the other side and screw them in place. Place the stoppers into the
remaining apertures in the door, and put the screw caps in place.
10. Remove the cover 10 from the bottom cover 1 and insert it to the guides on the other side of
the bottom cover (symmetrically to former position). Insert left and right legs of the bottom
cover 1 (see pic.) and push it until cover fixing.
OPERATION PROBLEMS AND THEIR SOLUTIONS
What if ...
The appliance is plugged in to the mains but it does not work and the
•
electricity supply voltage indicator is not illuminated. Check that your house
electricity supply installations are in order. Check that the plug is correctly inserted into
the electricity supply socket.
The noise has become louder. Check that the appliance is standing stable on a
•
level place. To make it level, regulate the front feet. Check if the appliance is not
touching any furniture and that no part of the refrigeration system at the back part of
the appliance body is touching the wall. Pull the appliance away from any furniture or
walls. Check that the cause of increased noise isn't due to bottles, cans or dishes in
the appliance that might be touching each other.
Water has appeared at the bottom of the refrigerator compartment. Check
•
whether a thaw water channel space isn't blocked. Clean the thaw water channel
space with a cleaner intended for that purpose.
Water has appeared under the refrigerator. The thaw water collection tray has
•
slipped off the compressor. Place the tray on top of the compressor.
When the appliance door is opened, the rubber sealing gasket pulls out. The
•
gasket is smeared with sticky foodstuffs (fat, syrup). Clean the sealing gasket and the
groove for it with warm water containing soap or dishwashing detergent and wipe dry.
Put the rubber sealing gasket back into the place.
The alarm LED lights up red, when the temperature of the freezer compartment
•
rises above -13 °C. When the freezer compartment temperature is -18 °C, the alarm
indicator is off and the symbol turns grey.
High temperature in appliance, the compressor operation pauses are short.
•
Ascertain whether the appliance door are shutting tightly, whether the door was not
kept open longer than necessary when taking out or putting in foodstuffs or whether a
large amount of warm food was placed in the appliance.
(TROUBLESHOOTING)
16