Connecting The Titrator - Combination With Accessories And Additional Devices; Back Panel Of The Titrator Titroline® 5000; Connection Ports Of The Titroline® 5000 . Connection Of Electrodes; Connecting A Printer - Xylem SI Analytics TitroLine 5000 Manual De Instrucciones

86
2.3 Connecting the Titrator - Combination with Accessories and Additional
Devices
2.3.1 Back panel of the titrator TitroLine® 5000
Fig. 3
2.3.2 Connection ports of the TitroLine® 5000 . Connection of Electrodes
®
The TitroLine 5000 has following connections:
1) pH/mV measurement input (DIN or BNC through adapter) for the connection of pH, redox and
other measurement or combination electrodes.
2) Input for reference electrodes (Ref.)
3) Temperature measurement input for connecting Pt 1000/NTC 30 electrodes
Two RS232 ports, 4-channel (Mini-DIN):
4) RS2 for connection of a weighing balance and other devices from SI Analytics (burettes etc.)
5) RS1 for connection to the PC
6) USB-A ("Master") interfaces for connecting USB devices such as a keyboard, printer, manual
control unit, USB memory device
7) USB-B interface (mini type) for connection to a PC
8) Connection of the external power pack/supply TZ 1853
9) On/Off switch
2.3.3

Connecting a printer

Printers with a USB interface are to be connected one the USB-A interface. These printers have to
feature HP PCL emulation (3, 3 enhanced, 5, 5e no GUI or GDI printers!). Alternatively the thermo-
compact printer Seiko S445 can be connected.
2.3.4

Connecting a USB device (manual controller, keyboard, memory device, hub)

The following USB devices can be connected to the USB-A interfaces:
•
TZ 3880 manual controller (in the following: "mouse")
•
PC-keyboard
•
Printer
•
USB storage devices, e.g. USB sticks
•
USB hub
•
USB barcode scanners
2.3.5

Connection of analytical balances

Analytical balances are to be connected to the RS232-2 using an appropriate cable.
1
2
3
4
5
6
7
8
9