User Manual; Safety Instructions - Toolland WHW250 Manual Del Usuario

1. Introduction
Thank you for choosing Toolland! Please read the manual thoroughly before
bringing this device into service. If the device was damaged in transit, do
not install or use it and contact your dealer.

2. Safety Instructions

Warning!
Read all instructions carefully. Failure to follow the
instructions may result in serious damage and severe injury.
Do not remove or obscure the warning tags on the winch. An
operator may need to see them to understand the proper operation
of the winch.
Keep this manual for future reference.
Safety Instructions for Installation
Prevent entanglement during installation and operation. Do not wear
loose clothing or jewellery, and restrain long hair. They can be
caught in moving parts and cause severe injury.
It is recommended to wear non-skid footwear.
Wear safety goggles and heavy-duty leather gloves during
installation.
Before installing, make sure that the mounting location is clear of fuel lines,
brake lines, electrical wiring, gas tanks, and any other component that can
be damaged by drilling mounting holes.
The mounting structure and hardware must be able to support the winch
and the load. Do not attach the winch to objects of unknown carrying
capacity. The winch may break loose during operation and cause severe
damage and injury.
Obtain the line manufacturer's recommendations for suitable line sizes and
types. Do not use a thinner or longer line than recommended. Do not link
multiple lines together.
Use underwinding (bottom winding) when installing the line: the line must
enter and exit the winch at the bottom of the drum.
V. 02 – 11/05/2017
WHW250

USER MANUAL

4 ©Velleman nv