Installation; Lifting Instructions; Location - ESAB Warrior 400i CC/CV Manual De Instrucciones

GB
Enclosure class
The IP code indicates the enclosure class, i. e. the degree of protection against penetration by solid
objects or water. Equipment marked IP23 is designed for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
4

INSTALLATION

The installation must be carried out by a professional.
4.1

Lifting instructions

WARNING
Secure the equipment - particularly if the
ground is uneven or sloping.
4.2

Location

Position the welding power source so that its cooling air inlets and outlets are not
obstructed.
bu21e
- 39 -
© ESAB AB 2013