Roland RP301R Manual Del Usuario página 39

• The explanations in this manual include
illustrations that depict what should typically be
shown by the display.
Note, however, that your unit may incorporate a
newer, enhanced version of the system, so what
you actually see in the display may not always
match what appears in the manual.
• Do not apply undue force to the music stand while
it is in use.
• Before opening or closing the keyboard lid, always
make sure that no pets or other small animals are
located on top of the instrument (in particular,
they should be kept away from the keyboard and
its lid). Otherwise, due to the structural design of
this instrument, small pets or other animals could
end up getting trapped inside it. If such a situation
is encountered, you must immediately switch off
the power and disconnect the power cord from the
outlet. You should then consult with the retailer
from whom the instrument was purchased, or
contact the nearest Roland Service Center.
Before Using USB Memories
(Using Optional USB memory)
• Do not connect or disconnect USB flash drive while
it is being read from, or written to (i.e., while the
USB flash drive access indicator will blink).
• Carefully insert the USB flash drive all the way in—
until it is firmly in place.
• Never touch the terminals of the USB flash drives.
Also, avoid getting the terminals dirty.
• USB flash drives are constructed using precision
components; handle the USB flash drives carefully,
paying particular note to the following.
• To prevent damage to the USB flash drives from
static electricity, be sure to discharge any static
electricity from your own body before handling
the USB flash drives.
• Do not touch or allow metal to come into
contact with the contact portion of the USB flash
drives.
• Do not bend, drop, or subject USB flash drives to
strong shock or vibration.
• Do not keep USB flash drives in direct sunlight,
in closed vehicles, or other such locations.
• Do not allow USB flash drives to become wet.
• Do not disassemble or modify the USB flash
drives.
CD handling
• When handling the discs, please observe the
following.
• Do not touch the encoded surface of the disc.
• Do not use in dusty areas.
• Do not leave the disc in direct sunlight or an
enclosed vehicle.
• Do not touch or scratch the recording surface of a
CD. Doing so may render the data unreadable. If a
CD becomes soiled, clean it using a commercially
available CD cleaner.
• Keep the disc in the case.
• Do not keep the disc in the CD drive for a long time.
• Do not put a sticker on the label of the disc.
• If dust or dirt adheres to a CD, lightly wipe it off
with a soft cloth.
• Always wipe from the center toward the outer edge
of the disc. Do not wipe in a concentric circular
direction.
• Do not use benzine, record cleaner spray or
solvents of any kind.
• Do not bend the disc. Bending discs may prevent
proper reading and writing of data, and may further
result in malfunction.
* Recording, duplication, distribution, sale, lease,
performance, or broadcast of copyrighted material
(musical works, visual works, broadcasts, live
performances, etc.) belonging to a third party in
part or in whole without the permission of the
copyright owner is forbidden by law.
Do not use this product for purposes that could
infringe on a copyright held by a third party. We
assume no responsibility whatsoever with regard to
any infringements of third-party copyrights arising
through your use of this product.
* The copyright of content in this product (the
sound waveform data, style data, accompaniment
patterns, phrase data, audio loops and image data)
is reserved by Roland Corporation and/or Atelier
Vision Corporation.
Purchasers of this product are permitted to utilize
said content for the creating, performing, recording
and distributing original musical works.
Purchasers of this product are NOT permitted to
extract said content in original or modified form,
for the purpose of distributing recorded medium
of said content or making them available on a
computer network.
* Roland, SuperNATURAL are either registered
trademarks or trademarks of Roland Corporation in
the United States and/or other countries.
* MMP (Moore Microprocessor Portfolio) refers to a
patent portfolio concerned with microprocessor
architecture, which was developed by Technology
Properties Limited (TPL). Roland has licensed this
technology from the TPL Group.
* Company names and product names appearing
in this document are registered trademarks or
trademarks of their respective owners.
Important notes
39