Mounting The Control Rod To The Main Frame; Mounting The Control Segment - Vicon ANDEX 773 Instrucciones De Montaje

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 159
Fig. 3-9
N
Fig. 3-10
Y
X
A
B
Fig. 3-11
Fig. 3-11a
Z
3.7.4 Mounting the control rod to the
main frame
Connect the control rod to the main frame by
attaching it to the hole above the aluminium
bearing and connect it to the bearing housing
using bolt (B). Secure it with split pins (fig. 3-8
and 3-9). Use the content of bag K.
3.8

Mounting the control segment

Mount control segment (X) with spacer (Y) and
sealing ring (Z) using screws (A) and washers
(B) (fig. 3-11).
Fit the control segment when in middle position.
To change the control point, the control segment
can be shifted in the slots. Fit lubrication nipple
(N) (fig. 3-10). Use the content of bag V.
EN
13

Publicidad

Tabla de contenido
loading

Tabla de contenido