Dmx Linking; Starting Address - Chauvet Slim PAR 56 IRC IP Guía De Referencia Rápida

EN
Control Panel
Description

DMX Linking

Starting Address

Master/Slave
Connection
Infrared Remote
Control
Button Function
<MENU> Exits from the current menu or function.
Navigates upwards through the menu list and increases
<UP>
the numeric value when in a function.
Navigates downwards through the menu list and
<DOWN>
decreases the numeric value when in a function.
Enables the currently displayed menu or sets the currently
<ENTER>
selected value.
The SlimPAR™ 56 IRC IP can work with a DMX controller when linked
by DMX serial connections. Instructions for connecting and configuring
this product for DMX operation are in the User Manual. If you are not
familiar with DMX,
www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 506.
The SlimPAR™ 56 IRC IP uses the DMX data connection for its
Master/Slave mode. Instructions for connecting and configuring this
product for Master/Slave operation are in the User Manual.
The SlimPAR™ 56 IRC IP is fully compatible with the Infrared Remote
Control (IRC) from CHAUVET®. For more information on the IRC or to
download instructions, go to www.chauvetlighting.com.
SlimPAR™ 56 IRC IP QRG
download the
5
DMX Primer from