Winding A Bobbin - Singer 6038 Manual De Instrucciones

51NOER
I
Winding a bobbin
1. Turn off the machine. Open the bobbin visor and
remove the empty bobbin which is inserted the
bobbin case.
2. Uft the presser foot and press the bobbin winding
indent (i llustration 1).
1 2
3. Place spool of thread on spool pin and slide spool
pin holder firmly over rim of spool. Note that the
thread must come out from the top of the spool
(illustration 2).
Note: Use the spool pin holder (large) only for spools
and spool pin holder (small) for spuns. The
thread holder has two sides: The larger one
must be used for large-sized spools only.
4. Lead thread end and snap it into lower thread
guide notch, then upper notch, from left to the
right, making a turn (illustration 3).
3