Descargar Imprimir esta página

Premium PHSM300B Manual De Instrucciones página 3

Batidora de mano y pedestal

Publicidad

Idiomas disponibles

Idiomas disponibles

*PARTS AND FEATURES
EN
*PRODUCT SPECIFICATIONS
Model
Power Supply
PHSM300B
120V~60Hz
*BEFORE USING MIXER
Before assembling the hand/stand mixer, be sure the power cord is
unplugged from the power outlet and the speed selector is in the "0" position.
1. Attach the hand mixer to the stand as illustrated in Fig.1. For detaching the
hand mixer, push the arrow on the hand mixer in the indicated direction
(Fig.2), and hold the head of the mixer to a tilted position while pressing
the headlock button (Fig.3).
2. Assemble the proper beaters or dough hooks into the mixer. Dough hooks
are only used for mixing dough and beaters are only used for beating eggs
or similar food.
NOTE: Beaters can be inserted in either of the two sockets below the
mixer, as the beaters are identical. For dough hooks, the one with the
washer can only be inserted into the big socket and the other one can only
Power
Capacity of the
Speed
bowl
300W
4.3 L
5 settings
4
be inserted into the small socket. The two dough hooks cannot be inserted
in reverse.
3. Place the stainless mixing bowl on position.
4. To lower the head and beaters/dough hooks into the mixing bowl, depress
the headlock button while holding the mixer with the other hand and then
ease the mixer down (Fig.4). A click sound will be heard when the head
has reached the correct position.
*SPEED GUIDE
Speed
Function
1
Blend
To combine liquids, fold in dry ingredients, egg
whites and whipped cream.
2
Stir
bread.
3
Mix
To prepare batter and mixes.
4
Beat
To cream butter and sugar. Make cookie dough,
cake mixes and frosting.
5
Whip
eggs (whites, yolks, whole), and mash potatoes.
Turbo
Whip
beat eggs(whole, egg whites and yolks), and
mash potatoes.
*USING YOUR MIXER
1. Asegúrese de que la unidad esté en la posición 0, y luego conecte la 1.
Ensure that the unit is at the 0 setting, and then plug in the power source.
2. Turn the speed selector to your desired setting. There are 5 settings. The
appliance will start working and the speed will increase 25% if the Turbo
Button is pressed at any time.
Warning: Do not stick knives, metal spoons, forks or any other utensil into
the bowl when operating.
3. The maximum operating cycle must not exceed 5 minutes. Allow a
minimum of 10 minutes rest time between two consecutive cycles. When
kneading yeast dough, we suggest to start with a low speed and then use
high speed to achieve the best results.
4. When mixing is completed, turn the speed selector to 0, and then unplug
the cord from power outlet.
5. Hold down the headlock button and ease the head of the mixer back until
the mixer head is locked into the tilt position.
6. If necessary, you can scrape the excess food particles from the beaters or
USES
5

Publicidad

loading