Assembly; Operations - Bissell READYCLEAN 47B2 SERIE Guia Del Usuario

Assembly

Your deep cleaner assembles quickly and
easily. The only tool you will need for assembly
is a Phillips head screwdriver.
1. slide upper body onto lower body.
2. secure with screws.
3. slide upper handle into upper body by
aligning the pin and sliding into place.
notE: be sure to secure upper handle before
lifting. Rotate handle lock clockwise to secure.
4. Place solution tank on back of unit.
5. Wrap power cord.
Assembly is now complete.

Operations

before you clean
1. Move furniture to another area if
cleaning an entire room. (Optional)
2. Vacuum carpet thoroughly.
3. Plan your cleaning route to leave an exit path.
it is best to begin cleaning in the corner farthest
from your exit.
4. Pre-Treating (optional) Pre-treat
stubborn stains and highly soiled carpet in
hallways and other high-traffic areas.
a. Generously spray bissell Pretreat evenly
over soiled area.
Caution: DO NOT OVER WET CARPET
b.Wait 3-5 minutes before deep cleaning.
Do not plug in your deep cleaner until
you are familiar with all instructions and
operating procedures.
1.
3.
pin
www.bissell.com
WaRnInG
2.
4.
Tip
» Deep cleaning
carpeting regularly
can reduce dust
and allergens in
your home.
800.237.7691
5