Publicidad
IP54/Type 12 Kit
Mounting—Montaje—Montage—Montaggio—Montering—
Montáž—Paigaldamine—Felszerelése—Mont ža—Montavimas—Monta —Montaža—
Montarea—
—
Step 1
Remove the IP54/Type 12 A-cover (with side opening).
Step 2
Only for FR2: Pry the cover off the sheet metal plate under the
B-cover with a slotted screwdriver (5 mm # width # 8 mm).
—Montagem—Asennus—
Step 3
FR1 (480V): Attach the control fan and airflow guiding paper to the
B-cover with four M3x20 screws. Notice the airflow direction arrow
on the fan.
FR1 (230V): No control fan.
FR2: Attach the control fan to the sheet metal plate with two M3x32
screws.
FR1
480V
Step 4
For FR1 (480V) and FR2: Connect the control cable to the fan power
terminal on the control board.
Instruction Leaflet IL040018EN
Effective May 2018
—
FR2
EATON
www.eaton.com
3
Publicidad
