Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2.
Before the dot stops flashing, touch the timer (1), you can realize the setting
of timing from 1 to 99 minutes.
3.
When the time is set, the timer indicator will flash for 5 seconds and the
countdown will begin immediately. The display will show the remaining time.
4.
After that, if the indicator will keep on flashing meaning that the timer setting
indicator shows the cooking zone remaining time until the timer expires; or
else the indicator will keep on lighting until the timer expires.
5.
When cooking timer expires, the corresponding cooking zone will be
automatically switched off and the display will show "H". Other cooking zone
will keep operating if they are turned on previously.
6.
When using "the timer as an alarm" and "the timer to switch off the zones"
together, the timer setting indicator will show the remaining time of alarm
as first priority. Press power level slider (3) of the cooking zone to show the
remaining time of switch off timer.
Hints and Tips
Problem
Possible causes
The induction
No power.
hob cannot be
turned on.
The touch
The keys are locked.
keys are
unresponsive.
The touch keys
There may be a slight film
are difficult to
of water over the keys or
operate.
you may be using the tip of
your finger when touching
the keys.
The glass
Rough-edged cookware.
is being
Unsuitable, abrasive scourer
scratched.
or cleaning products being
used.
What to do
Make sure the induction hob is
connected to the power supply
and that it is switched on.
Check whether there is a power
outage in your home or area.
If you've checked everything
and the problem persists, call a
qualified technician.
Unlock the keys. See section
'Using your induction hob for
instructions.
Make sure the touch key area is
dry and use the ball of your finger
when touching the keys.
Use cookware with flat and
smooth bases. See 'Choosing the
right cookware'.
Publicidad
