OK. OLE 32150-B SAT Manual Del Usuario página 100

Size - A5 Size - A5
EN
Signal DVB-S2
Satellite
Add
satellites:
Edit
satellites:
Delete
satellite:
Motor:
TV_A5_23.6_DE_EL_EN_ES_130306.indb 100
Press RED (GOTO) to add a new satellite, in which you must input an
unique longitude, and edit the satellite's name with soft keyboard.
Press GREEN (SLOW) to edit the selected satellite.
Press YELLOW (REPEAT) to delete the selected satellite. Press OK to
confirm. Press to select a satellite, whose settings will be shown at
right side:
LNB Type: Press or OK to show the list of LNB Type. You also
can enter frequency by selecting User Single or User
Dual.
LNB Power: Press to set the LNB power.
22KHz:
Press to select ON, OFF or AUTO, which is set with
auto when LNB Type is dual local oscillator.
Toneburst:
Enable or Disable the toneburst switcher.
DiSEqC1.0:
Select the right port up to 4 for the right LNB.
DiSEqC1.1:
Select the right port up to 16 for the right LNB.
Press to select DiSEqC1.2 or DiSEqC1.3. Then Press OK to show the
menu to set position:
Move Auto:
Press to start to move West/East. It will be stopped
automatically when the signal is locked.
Move
Press to start to move West/East. It will keep
Continue:
moving until you stop it.
Move Step:
Press to move just a step.
Store Store current motor position.
Position:
Goto
Press to go to the position stored.
Position:
Goto
Rest all the positions.
Reference:
Goto X:
Go to the position calculated from the local and satellite
positions.
100
6/3/13 4:25 PM