GE Monogram ZET1P Manual Del Propietário página 35

Care and Cleaning
Wall Oven
L off
oT;eTl
c[ooI:--
re_oT)(l[
The door is very heavy. Be careful when removing
and tiffing the door.
Do rwt lift the door @ the brindle.
To remove the door:
1
2
3
4
Fully open the door°
Pull the hinge locks down toward the door
flame, to the unlocked position. A tool, such
as a small flat-blade screwdIJve:; may be
required.
FirInly grasp both sides of the door at the top.
Close door to the door removal position,
which is most of the way and lift it up and out
unOl the hinge arm is clear of the slot.
Slot
d_.Cb
Hinge lock
Pull hinge locks down to unlock
To replace the door:
1 FirInly grasp both sides of the door at the top.
With the door at the same angle as the
removal position, seat the indentation of the
hinge arm into the bottom edge of the hinge
slot. The notch in the hinge arm must be
fully seated into the bottom of the slot.
3 Fully open the door. If fl:e door will not flflly
open, the indentation is not seared correc@ in
the bottom edge of the slot.
4 Push the hinge locks up against the flont
flame of the oven cavity, to the locked
position.
5 Close the oven doon
Removal position
Bottom Hinge arm
edgeof
slot,
Indentation
Hinge
arm
Push hinge locks up to lock
Probe
The temperature probe may be cleaned with
soap and water or a soap-filled scouring pad.
Cool the temperature probe before cleaning.
Scour stubborn spots with a soap-filled scouring
pad, rinse and dry°
Do not immerse the temf)erature f)robe in water:
Do not store the tem[)erature [)robe in the oven.
35