Safety During Service; Which Machine Is The Most Suitable For Each Application - ENAR PH60 Manual De Instrucciones

2.3 SAFETY DURING SERVICE

•
•
•
•
•
•
•
•
3 WHICH MACHINE
APPLICATION?
en
MODEL
APPLICATION
Patching areas
Building foundations
Paths and footways
Tennis courts and sports areas
Soil preparation
Final support for bridge and ramps
Railway junctions
Interlocking cement blocks
Construction of mains
Construction of drainage
Compaction of ditches.
Reparation of damage caused by
broken piping, cables, etc.
Work around piping, cables, drainage,
Filling with rocks
Gravel
Sand or volcanic material
Mixed grounds
Mud
Clay
Layer thickness 0 – 25 cm
Layer thickness 20 – 40 cm
Hot mortar
Cold mortar
Subgrade 40 – 100 mm
Layer of boulders 25 – 60 mm
4
PH60, PH70, PH80
Do not clean or inspect the equipment during operation.
Do not start the motor up with the cylinder flooded or if the spark plug in the petrol motors has
been removed.
Do not inspect the igniter plug to see if it is sparking correctly if the cylinder is flooded with
petrol or in the presence of any petrol fumes.
Do not use dissolvents or fuels to clean the equipment, particularly in closed spaces.
Maintain the area around the silencer clear of inflammable materials.
Before servicing petrol-driven machines, remove the spark plug to guard against the motor
starting up accidentally.
It is not permitted to use the equipment in explosive environments. The fuel tank should be
shut tight. When being transported over long distances, it is highly recommended that the fuel
tank be emptied beforehand.
The transport accessory has not been designed for standing the compaction plate on it and
should only be used to move the equipment.
# Can be used
IS THE MOST
Reversible plates
#
+
#
#
+
+
+
#
+
+
+
#
#
+
+
+
+
+
+
+
#
#
+
#
+ Recommended
SUITABLE FOR
Non-reversible Tamping rammers
plates
# #
+ #
+ #
+
# +
+
+
+
# +
+ +
+ #
# +
+
+
+ +
+
+ #
+ #
# +
+
TAMPING RAMMERS
EACH