4.3 Oil level loading and check.
NOTE: The machine is delivered without oil, ¡do not attempt to start up
the machine without adding oil first!
Ensure that the generator is on a perfectly leveled surface to avoid mistakes in
the oil filling.
Remove the oil filling cap and pour oil in the hole until the maximum level shown
in the figure below is reached.
OIL FILLING HOLE
Oil capacity to the correct level according to the model is:
Model MG3000 0.6 liters.
Models MG5500 and MG6200E
Use good quality SAE15W30 SAE10W30 or SAE10W40 4-stroke motor oil. Oil
quality API: "SG", "SF" (check container specifications).
NOTE: Consider that the engine consumes some oil during usage. Check
the oil level before each use and refill if the level has diminished.
NOTE: Never use old, dirty or bad oils. Do not use oil if you don't know its
grade and quality. Do not mix different types of oils.
MAXIMUM LEVEL
OIL FILLING CAP
1.1 liters.
9