Use Of The 230V De Ac Outlet; Thermal Protector - MAG MG3000 Instrucciones De Uso

6.1 Use of the 230V de AC outlet.

NOTE: Check that no devices are plugged into the generator, unplug
everything before starting the engine.
Start the engine following the steps indicated in this manual.
Once started, verify that the thermal protection (BREAKER) is upward in the
"ON" position, now you can connect your devices.
In order to improve the engine operation and extend the life of the machine, we
recommend a "break-in period" of 20 hours without forcing the generator, with
charges that do not exceed 60% of the equipment's maximum output.
WARNING: Confirm that all electrical devices are in good work conditions
before plugging them to the generator.
If an electrical device is not working properly, is slow or stops suddenly, turn off
the engine immediately and unplug the device.

THERMAL PROTECTOR

16