Oil Change - MAG MG3000 Instrucciones De Uso

8.1 Oil change.

1 Keep the engine running during 5 to 10 minutes for the oil to reach some
temperature and reduce its viscosity (more liquid). This way it will be easier
to extract it completely.
2 Place an appropriate container under the oil draining hole to collect the used
oil.
3 Unscrew the oil draining screw by turning counter clockwise, kept the screw
and its joint.
4 Release the oil filling plug so the engine can intake air and achieve faster
draining.
OIL FILLING PLUG
OIL DRAINING
HOLE
5 Once all of the oil has been extracted, place the draining screw again with
its joint and clean oil spillage, if any.
6 Refill with the recommended oil to its maximum level, without exceeding. If
the machine is leveled, the oil should not exceed the level. (check page 10
of this manual for the type of oil).
OIL DRAINING SCREW
20