Installation Drawing; Explanation For Common Faults; Solutions Of Problems - Multilaser Royal P3159 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Installation Drawing

Diassembly Drawing

Explanation for Common Faults

During using the player, common faults can be solved as the following table. If any unmentioned fault is
found, please contact with the nearby franchiser immediately.

Solutions of Problems

Lack of Power Supply
The car is not ignited/ if any power supply has been installed in the car's accessory, you can turn the
ignition switch to ACC/ if the fuse has broken, you can replace a new fuse/ the player cannot work normally/
if the temperature in the car is too high, you
can enable the temperature to be normal and then try again.
Soundless:
If the volume is set as the minimum, you can adjust it to a proper level. Improper wiring, unsuitable or
broken format of memorizer's (SD/USB) file may cause the soundless effect.
Failure of Reception of a Radio
If the antenna is not connected well or the signal is too weak, you can insert the antenna into the antenna
hole firmly; if the searched broadcasting station cannot be locked in the automatic search, the station's
signal may be too weak, you can select the station manually; besides, if you start MONE mode, you'll obtain
a better effect.
drawing 1
drawing 4
Multilaser Royal
drawing 2
drawing 3
drawing 5
17

Publicidad

Tabla de contenido
loading

Tabla de contenido