Power Supply Installation - ITS EKSELANS KVP 1430 Manual De Usuario

EN
4.4. INDOOR MONITOR INSTALLATION
In order to mount the monitor onto the wall, set drilling marks by
using the supplied wall-mount.
Pass the cables through the mount and make the connections. Hung
the monitor into the wall mount.

4.5. POWER SUPPLY INSTALLATION

In case of using DIN rail EN50022 hung the PSU by slidinng the
lever and make the electrical connections.
In case of not using a rail system, hung the monitor onto the wal by
drilling three holes.
Once all elements are connected and verified, connect to the mains
voltage network.
4.6. ELECTRONIC LOCK CONNECTION
The outdoor panel PE 1 / PE 2 supplies 12V DC (continuous current)
to feed an electronic lock. This voltage is supplied for ~1 second
when the order is given from the indoor monitor.
For its connection check the chapter, "2.2 Controls and connec-
tions".
4.7. CONNECTION WITH EXTERNAL OPENING
PUSH BUTTON
The outdoor panel can be connected to an external push button for
door opening purspose.
For its connection check the chapter, "2.2 Controls and connec-
tions".
Have in mind the passage of its connection cables prior to mount
the panel onto the wall.
92