Silca SMART Manual De Uso página 8

SMART Remote Programmer
The remotes prese ng is done via NFC technology by placing the remote in the specifi c area "B" (Fig. 2) and
selec ng the specifi c func on in the PC so ware or in the mobile device APP.
PC PROGRAM
The Smart Remote Programmer so ware has been developed to allow interfacing between the Smart Remote
Programmer and a PC.
The program can be downloaded free of charge from www.silca.biz - www.ilco.us web site and can be installed
on Microso Windows Vista, 7, 8 and 10 opera ng systems.
FOR MORE INFORMATION SEE www.silca.biz - www.ilco.us, AND SEARCH FOR "SRPSOFTWARE " .
SRPSOFTWARE
MYSILCA SRP
MySilca SRP App has been developed to allow interfacing between the Smart Remote Programmer and an
Android or IOS mobile device.
The App can be downloaded free of charge from Google Play or App Store and can be installed on Android
or IOS devices with Bluetooth 4.0.
Li the ba ery housing cover "H" (Fig. 6). Remove the exhausted ba eries and fi t four new 1.5V alkaline
ba eries(AA), taking care to posi on the poles properly. Replace the cover.
WARNING: DANGER OF EXPLOSION IF THE BATTERY IS REPLACED WITH ONE OF THE WRONG TYPE
8
SOFTWARE AND OPERATING GUIDE
REPLACING / INSERTING BATTERIES
Copyright Silca S.p.A 2018
English