System Requirements - i-tec CATRIPLE4KDOCKPD Manual De Instrucciones

Quick Start / USB-C / USB-A 3.0 3x 4K Docking Station
supporting up to 1x 4K 3840x2160@30Hz (the HDMI port is only available
in case of connection of the docking station to a USB-C port of your laptop)
• 2 monitors connected by means of Display Ports support up to
• 4K 4096x2160@60Hz and 1 monitor connected via HDMI supporting up to
• 4K 3840x2160@30Hz (the HDMI port is only available in case of connection
of the docking station to a USB-C port of your laptop)
A remark for macOS and monitors with two DP cables:
• Chipset: DisplayLink DL6950, VIA VL813, Texas Instruments TPS65983
• Power adapter: input 100-240V 50/60Hz 1.8A; output: 20.0V/6.75A
• Product dimensions: 245 x 95 x 30 mm
• Product weight: 330 g

SYSTEM REQUIREMENTS

Hardware requirements: Laptop / tablet with a free USB-A or USB-C port
Operating system: Windows 7 / 8 / 8.1 / 10 32/64 bit, macOS X, Linux Ubuntu
14.04 / 16.04, Android 6 or later. Windows 10 – automatic installation of OS
drivers. Other operating systems – manual installation of drivers. Firmware
updates automatically.
DRIVER INSTALLATION IN WINDOWS 7 / 8 / 8.1 / 10 (32/64 BIT)
ATTENTION! Do not connect the docking station to your laptop / tablet until you
have installed the appropriate drivers. Drivers must only be installed before first
use. Before installation, make sure that your system has installed the latest
drivers for your device and updated BIOS.
For Windows 7 / 8 / 8.1, download the drivers from our website www.i-tec.cz/en
on the "Download" tab of this product. Run the installation from the downloaded
file, select the installation language, and follow the instructions on the screen.
In Windows 10, the docking station can be connected directly, drivers are
automatically installed from the system when connected to the Internet.
In Windows 7 / 8 / 8.1 / 10, install the drivers as the "Administrator" user. The
screen may blink while the drivers are being installed, this is a standard process.
Once the installation is complete, we recommend restarting the notebook / tablet.
In the environment with more than one laptops equipped with Windows 7, 8,
8.1 operating system, a single-shot corporative installation by the system
administrator can be performed. For more information on a method of installation,
please refer to the instructions below):
http://www.displaylink.com/downloads/corporate
EN
7