Greenlee PDMM-20 Manual De Instrucciones página 6

Important Safety Information
Electric shock hazard:
• Unless measuring voltage, shut off and lock out power.
Make sure that all capacitors are discharged. Voltage
must not be present.
• Using this unit near equipment that generates
electromagnetic interference can result in unstable or
inaccurate readings.
Failure to observe these warnings could result in severe
injury or death.
Electric shock hazard:
• Do not change the measurement function while the test
leads are connected to a component or circuit.
• Do not use the meter to measure voltages in circuits
that could be damaged by the Auto V•Ω mode's low
input impedance (approximately 160 kΩ).
• Do not attempt to repair this unit. It contains no user-
serviceable parts.
• Do not expose the unit to extremes in temperature or
high humidity. Refer to "Specifications."
Failure to observe these precautions may result in injury
and can damage the unit.
NOTE: The test leads of this unit are not removable. Do not
attempt to remove them.
6