Pc Camera; Pc Camera (Optional); Pc Camera Driver Installation; Pc Camera Audio Setup - EUROCOM m199 Manual Del Usuario

Concise User's Guide

PC Camera

The PC Camera module uses the BisonCap application
to capture video files.
Latest PC Camera Driver Information
Check the Device Drivers & Utilities + User's Manual disc,
and any accompanying insert pages, for the latest updated
information on the PC Camera driver, which may override
the information provided here.

PC Camera Driver Installation

1. Turn on the module using Fn + F10 (the indicator
will briefly be displayed when the module is
powered on).
2. Click Option Drivers (button).
3. Click 2.Install Camera Driver > Yes.
4. Choose the language you prefer and click Next.
5. Click Next > Finish to restart the computer.
6. Run the BisonCap application program from the
BisonCam shortcut on the desktop, or from the
BisonCam item in the Start > Programs/All
Programs menu (if the hardware is turned off use the
Fn + F10 key combination to turn it on again).
26 - PC Camera

PC Camera Audio Setup

If you wish to capture video & audio with your camera,
it is necessary to setup the audio recording options in
Windows.
1. Click Start, and click Control Panel (or point to Settings
and click Control Panel).
2. Click Sound (Hardware and Sound).
3. Click Recording (tab).
4. Right-click Microphone (Realtek High Definition Audio)
and make sure the item is not disabled.
5. Double-click Microphone (or select Properties from the
right-click menu).
6. Click Levels (tab), and adjust the Microphone and
Microphone Boost sliders to the level required.
7. Click OK and close the control panels.
8. Run the BisonCap program from the Start > Programs/
All Programs > BisonCam menu.
9. Go to the Devices menu heading and select Microphone
(Realtek....) (it should have a tick alongside it).
10. Go to the Capture menu heading and select Capture
Audio (it should have a tick alongside it).