FTE Maximal GENIUS LTE Manual De Usuario página 31

2.5.- Info Menu
This menu shows the information about the Hardware version (HW ver.) and
firmware (SW ver.) which with the equipment is provided.
Press CANCEL to go back to previous menu.
2.6.- Standard Menu
This option allows selecting the modulation Standard of the amplifier.
Options: CH 8 ( 8 MHz bandwidth) and CH 7 (7 MHz bandwidth)
The CH 7 standard configures a channel list that is based on the Australian
Standard; it should be activated only if you want to distribute the signal under
this standard. For this reason it is not recommended to change the
modulation standard configured by default (CH8).
By changing this option, a change in the output channel list of the amplifier
will be made and the process can take several minutes. Please do not
disconnect the programmer until the whole process is finished.
Reserved for technical modifications and/or errors
User's Manual · Genius Lte
11
- -
GENIUS ICT
Inputs Back-up
Prog CH >Info<
Auto Standard
GENIUS ICT
HW ver.: GENIUS ICT
SW ver.: v.7c50
Serial : 65535655
GENIUS ICT
Inputs Back-up
Prog CH Info
Auto >Standard<
GENIUS ICT
>CH 7 MHz<
CH 8 MHz
Genius Lte Version en_1.0 FTE maximal