Safety Features - Miele professional HM 29-175 Instrucciones De Manejo

Guide to the machine

Safety features

Emergency stop switch
(at the front of the left hand column and at the
rear of the right hand column)
Immediately the emergency stop switch is
pushed in the roller stops and the heater plate
is withdrawn downwards.
To reset the emergency stop switch after it
has been used, turn the ribbed disc clockwise.
Finger guard
If the fingers slip between the laundry feed in
table and the finger guard the roller will stop
immediately and the heater plate is withdrawn
downwards. The finger guard does not work if
the roller is running in reverse.
If the finger guard has been activated, the ma-
chine can only be restarted by pushing in
button "I".
M.-Nr. 05372840
The finger guard is a safety feature which
must be checked daily for proper fun-
ctioning before the machine is used.
Hand wheel (at the rear of the right hand
column)
The hand wheel is used to release the heater
plate from the stationary roller in the event of
a power cut. Turn the handwheel anti-clock-
wise to lower the heater plate from the roller
and clockwise to raise it to the roller.
The machine must be disconnected from
the mains supply. (Switch off at the isola-
tor or mains fuse box).
10