Variations In Equipment; Laundry Return Feed; Belt Feed-In - Miele professional HM 29-175 Instrucciones De Manejo

Variations in equipment

Laundry return feed

Laundry return feed enables ironed laundry to
be taken off the machine at the feed-in. No
extra personnel are required for taking
laundry off the machine. For this mode of
operation only the ironer can be positioned
close to a wall, (allow space for servicing).
The laundry return feed directs laundry back
to the front of the machine on to an ironing
shelf located above the finger guard.
If laundry is to be fed to the ironing table at
the rear allow adequate space for installation.
Fold the laundry guide back on to the laundry
table before starting.
Then position the laundry return feed to direct
laundry to the rear. Laundry is guided to the
ironer table.
If the ironing cloth cover is to be changed or
the roller needs more padding the lifter
springs need to be individually taken off the
pick-off strip.

Belt feed-in

This makes feeding in of laundry easier.
Items of laundry are placed parallel to the rol-
ler at the front of the feed-in table on the belt,
smoothed out and fed into the roller.
15 M.-Nr. 05372840