Mounting Off The Shield For Terminals; Mounting The Disconnector; Mounting The Disconnector On The Mounting Plate - WEG FSW 630 Serie Manual De Instrucciones

1.6. MOUNTING OFF THE SHIELD FOR TERMINALS

Withdraw the shield for terminals up to the base until the fasteners of the cover for
terminals are fasten (Picture 9).
Turn the screw by 90 degrees in the selected shield of terminals in the reverse direction
than in point 5.a.

2. MOUNTING THE DISCONNECTOR

2.1. MOUNTING THE DISCONNECTOR ON THE MOUNTING PLATE

Take off the cover (acc. to point 3).
Take off the shields for terminals (acc. to point 5).
Fix the disconnector with bolts 4 x M8 (Picture 10).
Mount the shields for terminals (acc. to point 6).
Mount the cover (acc. to point 4).
Instruction manual for mounting and service of fuse switch disconnectors
Picture 9
Picture 10
www.weg.net
13