Synoptic Display - Soler & Palau ADVANZ Instrucciones De Uso

Changing the speed on the fans
Rotate the knob clockwise to increase the speed and anticlockwise to reduce it. When
timer is selected, the speed is automatically selected according to the weekly
programme, whereas when Auto is selected the speed is selected automatically,
depending on the quality of the air extractor and the comfort profile configuration.
Changing the set temperature
It is available only if the unit is equipped with post-heating, represent the temperature desired in the
room. Rotate the knob clockwise to increase the temperature and anticlockwise to reduce it.
Alarms
In case of alarms, a flashing icon and writing are displayed. The writing may indicate dirty filters or suggest
to call service for more serious problems.
Switching to the synoptic window
Switch to the synoptic window by keeping the knob depressed for 5 seconds.
S
YNOPTIC DISPLAY
The synoptic display is a detailed graphic representation of the machine state, from which all functions
available can be enabled.The synoptic window can be switched to from the simplified window by keeping
the knob depressed for 5 seconds. On the contrary, the synoptic window can be accessed from the other
windows by closing all windows. Only when several machines are installed: the state of the first machine
is always displayed, while alarms are highlighted when any of the machines installed is working irregularly.
Synoptic window