Users Parameters - Soler & Palau ADVANZ Instrucciones De Uso

Ti(input):
Ok indicates good operation of the input air temperature sensor, while ko indicates sensor
failure.
Tx(expelled):
Ok indicates good operation of the exhaust air temperature sensor, while ko indicates
sensor failure.
Tw(water):
It is only present when water coil-operated post-heating is on.
Ok indicates good operation of the water coil temperature sensor, while ko indicates sensor failure.
Tw(water)low:
It is only present when water-coil operated post-heating is on. Ok indicates good
operation of the coil, while ko indicates it is frozen.
Filters:
Ok indicates efficient filters, while ko indicates dirty filters. If the alarm is operated through
manostats, the return will be automatic once filters are clean. Otherwise, if it is operated through an hour
counter, it must be disabled from the parameters menu by setting the following number of cumulated
hours.
Fans:
Ok indicates good operation of the fans, while ko indicates failure of the fans. This alarm is available
only if the unit is equipped with fans alarm.
Returning to the window menu
The menu window is accessed through the "close" icon:
- turn the knob until the icon is selected. The icon will become bright against a dark background
- press the knob to confirm your selection: the menu window will be displayed
U '
SER S PARAMETERS
The user may configure air recycling to achieve the best compromise between maximum yield and
satisfying comfort.
The parameters window is accessed from the selection menu.
The window is only available when the air recycling machine includes a bypass or post-cooling.
Additionally, the window will be not displayed if the season is changed automatically (from the factory
through an external signal).
Two different displays will be available depending on either the bypass control is set according to the
season or by on-off-automatic control. The adjustment type is set in the factory.
Menu / Parameters
season based