Installation; Terms Of Guarantee - Soler & Palau ADVANZ Instrucciones De Uso

INSTALLATION

The machine must be installed by expert staff.
Position
For the best operation, it must be fixed to an indoor wall, approximately 1.5 m above the floor, far from
heat sources (like radiators, stoves, etc.), and must be not exposed to direct sun rays. It must be not fixed
to doors, which might slam and damage electronics.
Wiring
Connect the power to + and – terminals observing the correct polarity. Connect the BUS to the s-marked
2
terminal. Use of minimum 0.3mm shielded cable is recommended.For communication error check the
wiring between the control panel and the electronic board.
S
PECIFICATIONS
Power: 9 / 30 VDC 250mW
Maximum operating temperature: 0 / 50 °C
Maximum storage temperature: -20 / 70 °C
T
ERMS OF GUARANTEE
The 2 year (24 month) guarantee period starts when the equipment is received. The date of receipt must
be proved by the purchasing invoice. During the guarantee period, the manufacturer will repair all faults
arising from manufacturing defects or material vices on a free of charge basis. The manufacturer will
replace the defective pieces or the entire equipment in its opinion. Any other claims for guarantee
performance are excluded. The manufacturer also accepts no responsibility for any subsequent damage.
The material that is claimed to be defective must be shipped to the manufacturer through the reseller,
together with a detailed description of the fault, to be drawn up by the reseller. The goods will be shipped
at the customer's expense. The repaired goods will be shipped at the manufacturer's expense. In no case
will the manufacturer be liable for defects caused by improper use that does not comply with the user
manual provided and natural events like lightning, floods, earthquakes, fires, etc. The manufacturer
accepts no responsibility for repairs or changes to the equipment that have been made by people foreign
to the manufacturer.