Ehma250 - Ecler essentials eHMA Serie Manual De Usuario

9.3. eHMA250

eHMA250
Inputs
Power Output
Frequency Response (HI-Z OUT)
Frequency Response (LOW-Z OUT)
THD + Noise@ 1kHz Full Power, Speaker Out, Line
High Pass Filter
Tone Control
Signal Noise Ratio (Gain at center, Low-Z Out)
INPUTS 1-2
Type
Connectors
Nominal Impedance
Phantom power
Sensitivity
CMRR
Talkover
INPUTS 3-4
Type
Connectors
Nominal Impedance
Phantom power (MIC)
Sensitivity
CMRR (MIC)
Talkover
INPUTS 5-6
Type
Connectors
Nominal Impedance
Sensitivity
Low-Z output
High-Z output
THD + Noise Aux Out
Channel Crosstalk @ 1kHz
AUX OUTPUT
Nominal Level
Min Load
High-Z OUTPUT
Low-Z OUTPUT
Bass
Treble
LINE
MIC (BAL)
19
MIC
Mono, balanced
Euroblock
>1kΩ
+15VDC (ON/OFF ext switch)
-20 to -50dBV
>65dB @ 1kHz
Time: 2 sec.
Depth: -30dB
MIC / LINE
Mono, balanced / Stereo, unbalanced
Euroblock / RCA
>1kΩ / >4,5kΩ
+15VDC (ON/OFF ext switch)
-20 to -50dBV / -15 to +15dBV
>65dB @ 1kHz
Time: 2 sec.
Depth: -30dB
LINE
Stereo, unbalanced
RCA
>4,5kΩ
-15 to +15dBV
250W @ 4Ω/ 8Ω
250W @ 50V/ 70V/ 100V
70Hz – 25kHz (-3dB)
20Hz – 25kHz (-3dB)
<0.09%
<0.02%
>65dB
0dB
10kΩ
70Hz / 12dB/oct
20Hz / 12dB/oct
100Hz ± 15dB
10kHz ± 15dB
>85dB
>75dB